305140 PEK6 26-8awg 8mm UL/CSA 600v 44amp Feed Through

SKU: 305140
Manufacturer: Klemsan
Manuf Part#: 305140
Quantity: 100+
Price: $0.67
Qty: - +

305140 PEK6 26-8awg 8mm UL/CSA 600v 44amp

    • Housings - The plastic housing holding the metallic screws and clamps is made of UL 94 V2 (105 degree C) thermoplastic polyamide 6.6. This plastic and its certification allow operation rated at 600 V, providing ample dielectric strength for any Industrial Application.
    • Clamps - Steel is one of the strongest materials available for its value. The clamps are zinc plated to guard against corrosion. When properly torqued, the clamp is designed to self-lock.
    • Screws - Made of steel as well, the screws act as a system with the clamps - this system requires the same materials for each component. The screws lift and help to self-lock the clamps providing a downward force onto the conductors. The screws are also plated with a Zinc finish to prevent any form of corrosion.
    • Screw Connection
      • This is the most popular of all known connection methods. Screw connection refers to any connection in which the conductor is stripped of its insulation and clamped without any preparation.
      • When the screw is tightened, the pressure pulls apart both halves of the clamping yoke. This generates a high locking action on the screw and provides excellent vibration resistance.
    • Tension Clamp System
      • Tension clamp connection allows the conductor to be pressed directly against the current bar. The clamp is opened with a screwdriver allowing the insertion of the conductor.
  • PEK type terminals are manufactured from a thermoplastic material and are mountable on TS35 and TS32 DIN rails. Nine different colors give users the ability to group control systems, current and/or voltage levels.
  • Colors Available
    • Beige 305140
    • Blue 305141
    • Green 305142
    • Yellow 305143
    • Red 305144
    • Black 305145
    • White 305146
    • Orange 305147
    • Brown 305148
Related Products
SKU: 463150
463 150 APP End Plates for PEK 2.5 to PEK 10 Terminal Blocks
SKU: 445150
445 150 NNP End Plates for PEK 2.5 to PEK 10 Terminal Blocks
SKU: 495049
End Bracket for AVK Din Rail Terminal Blocks 495 049
SKU: 475142
UK 6 Cross Connector for PEK 6 Din Rail Terminal Blocks 475 142. Standard poles of 2, 3, 4, or 10 are available to satisfy your design requirements.