1555.N1000.22 1in NPT Cable Grip Cable Dia: 17.0 to 22.0mm 36mm Long

1555.N01000.22 Grey or 1545.N01000.22 Black Cable Grip

• NPT 1 inch
• Cable Diameter: 17.0 to 22.0 mm
• Wrench Size: 42 mm
• Height: 36 mm
• Wider Domed Nut Which Can Not Be Over-Tightened.
• The deep flats allow enough room for the proper wrench to tighten or loosen the cable grip without the wrench coming off.
• A small spacer exists between the domed nut and the locking collet, providing an additional seal when fully tightened.
• Neoprene Rubber Seal. This seal grips around the cable to form the IP68 barrier when properly tightened.
• Webs are designed in an alternating geometry which enhances gripping capability.
• The web design is staggered to allow for seal conformity around the cable to maximize the pull out resistance and protection against the elements.
• The webs are designed so that they will spring back to their original open position making installation easy while maintaining the seal quality.
• The ‘Tight Seal’ design allows the domed nut to lock with the collet before any threads are engaged. This guards against missthreads as well as aids in the installation process.