1555.N0500.07 1/2in NPT Cable Grip Cable Dia: 3.0 to 7.0 mm 26mm long

SKU: 1555.N0500.07
Manufacturer: American Electrical
Manuf Part#: 1555.N0500.07, 1545.N0500.07
Quantity: 35+70+140+
Price: $2.26$2.15$2.04
Qty: - +

1555.N0500.07 Grey or 1545.N0500.07 Black Cable Grip

  • NPT 1/2 inch
  • Cable Diameter: 3.0 to 7.0 mm
  • Wrench Size: 24 mm
  • Height: 26 mm
  • Wider Domed Nut Which Can Not Be Over-Tightened.
  • The deep flats allow enough room for the proper wrench to tighten or loosen the cable grip without the wrench coming off.
  • A small spacer exists between the domed nut and the locking collet, providing an additional seal when fully tightened.
  • Neoprene Rubber Seal. This seal grips around the cable to form the IP68 barrier when properly tightened.
  • Webs are designed in an alternating geometry which enhances gripping capability.
  • The web design is staggered to allow for seal conformity around the cable to maximize the pull out resistance and protection against the elements.
  • The webs are designed so that they will spring back to their original open position making installation easy while maintaining the seal quality.
  • The ‘Tight Seal’ design allows the domed nut to lock with the collet before any threads are engaged. This guards against missthreads as well as aids in the installation process.