3000-36-1-1 AmpFlex 3000A, 36in Flexible Senors

3000-36-1-1 AmpFlex 3000A, 36in Flexible Senors

The AmpFlex® is an AC current sensor composed of a flexible Rogowski coil and an electronic module. The sensor permits measurements on conductors where standard clamp-on probes cannot be used. In particular, it can be installed in tight spaces, around cable bundles, around wide or large bus bars, or even wrapped around irregular shapes. The Shape Memory feature enables the user to pre-shape the sensor before inserting it between or around conductors. This feature facilitates positioning the sensor around the conductor, enhances user safety, and alleviates the drooping effect associated with other flexible sensors.

The AmpFlex® has a mV output proportional to the current measured for direct readings on DMMs, loggers, oscilloscopes and power or harmonic meters. The length of the flexible sensor can be selected from 24" (450mm) to 60" (1520mm).

• Maximum Conductor Size: 11" (290mm)
• Measurement Range: 5  to 3000A
• Accuracy: 1% ± 200mA
• Current Range: 3000Arms AC
• Output Signal: 1mV/A
• Phase at 50Hz: 0.5°